The Basics of Roofing Installation Process

For an average person, understanding a roofing installation process may not be as simple as it sounds. However, some contractors will go the extra mile to provide you with excellent service in putting on a roof in your home. You just have to hire a reliable contractor, locally if you must prefer, to have your roof installed while following a stringent process with absolute attention to detail like Needham roofing contractor provides excellent services and has been in the industry for a long time. 

That being said, you can’t just leave it all to the contractor, knowing the basics of the process in installing a roof will also put your mind at ease when you know what your contractor is doing.

Here are the basics.

1. Proper Protection of Your Home or Your Yard

Appropriate use of protection guards and rails should be used by your contractor to keep other parts of your house safe from the construction. They can utilize plywood and down tarps to protect windows, driveways, and your yard from tearing and installation of the roof. You only need to replace your roof, and not the whole house or other parts for that matter. 

2. Removal of Old Roofing Materials

Tearing off the old roof varies from every house. It will depend on what condition the roof is in, how many layers it has and most importantly, the materials used for roofing. After removing the old roof, workers will take a look at decking if there are rotten parts needing replacement or repair. 

3. Preparing for New Shingles

Following the repair of the decking, you need to prepare for new shingles. At this point, workers will install a drip edge. You will see them putting a bent sheet of metal around the edges of the roof. This is done to prevent rain from going down to your roof material. Likewise, they will install an ice and water shield. This will protect the unguarded parts of your roof from leaks such as chimneys and pipes. 

A synthetic underlayment or roof felt will be installed after the drip edge and ice/water shield installation. Just like the latter, the roofing felt will protect the entire roof from leaks. So you need to make sure that both ice/water shields and roofing felt will be installed by your contractor, that way, your house is protected from leaks for a long time. Watertite Roofing and Skylights provide top quality products to be used on your roofs.

4. Installation of Shingles

Now you’re almost done with your roof installation. Shingles will now be put up and an ideal material for this is metal. According to Forbes – metal shingles, though costly from the start, offer the appearance of natural materials but without maintenance costs. 

5. Cleaning up

It is a very important part of the project which is usually overlooked by contractors. Good service from your reputable contractor would ensure that after completing the installation of your roof, your house is spic and span, and without a single remnant of construction material even as small as a nail.

6. Final Inspection

After everything is finished, your contractor must make a final inspection of their project to make sure everything is in place and the process followed precisely. 

Now that you have familiarized yourself with the process of installing a roof, all you need a credible contractor for your project. For expert roofing installation services you may check out right now.